Noticias

May 2019

PROCS EMEA-SPAIN-Orcoyen
New gIMM-PROCS implementation to trace the final assembly production of the new FORD C482 model
OEM: FORD

PROCS ASIA-CHINA-Hangzhou
New gimm PROCS implementation to trace the production of a new line
OEM: CHEHEJIA,GEELY

LINCS EMEA-SPAIN-Martorell
New gimm especific adaptations in order to send information related to new SEAT LEON PQ38 seats in the Baugruppen files and to generate automatic email alerts.
OEM: SEAT

PROCS EMEA-SPAIN-Almussafes
New gimm PROCS implementation to control new workstations for Almussafes FCM F430B – FORD C482 project.
OEM: FORD

PROCS EMEA-CZEC REPUBLIC-Mlada Boleslav
New gimm PROCS implementation to trace the production of the new line AUDI Q7 OPF D667C .
OEM: AUDI

LINCS EMEA-SPAIN-Abrera
New LINCS adaptations to sequence in JIT time for the production line of new SEAT LEON PQ38. The new process will be added to the current plant LINCS system.
OEM: SEAT

PROCS EMEA-CZEC REPUBLIC-Mlada Boleslav
New gimm PROCS implementation to trace the production of a new line for VOLKSWAGEN D526B line.
OEM: VOLSKWAGEN

PROCS EMEA-SPAIN-Orcoyen
New gimm PROCS implementation to trace the production of VOLKSWAGEN line 420.
OEM: VOLSKWAGEN


April 2019

PROCS EMEA-ITALY-Terni
New gIMM PROCS implementation to trace the production of a new line for Maserati D683B project.
OEM: MASERATI

LINCS EMEA-SLOVAKIA-Hlohovec
New LINCS adaptations to fit custmer’s particular needs. Current system will be modified to add a special process to supply finished aftermarket products to JLR (JAGUAR-LAND ROVER). The new process includes printing a special OEM label in a second printer.
OEM: JAGUAR-LAND ROVER

PROCS EMEA-CZEC REPUBLIC-Pisek
New gIMM PROCS implementation to trace the production of a new line for VOLVO F511B project.
OEM: VOLVO CARS

PROCS EMEA-FRANCE-Messei
New gIMM PROCS implementation to trace the production of a new line for DV6.3 PSA line
OEM: PSA

PROCS ASIA-THAILAND-Rayong
New gIMM PROCS implementation to trace the production of a Door Panels & Instrumental Panel lines for VinFast project.
VINFAST is a new car manufacturer headquartered in Vietnam and founded in 2017. This project is the first of two done by gIMM for VINFAST so far and it means the 35th brand and 25th country where gimm is implemented.
OEM: VINFAST

PROCS EMEA-SPAIN-Vigo & Arevalo
gIMM PROCS will be adapted to add new KPI’s calculations to the customer’s core functionalities. These functionalities encompass the possibility to indicate and record stops reasons in the workstations (and calculate downtime elapsed time). In addition, PROCS will be updated to add production statistics data per hour (currently, they are only calculated per shift).
OEM: N/A

PROCS ASIA-VIETNAM-Hai Phong
New gIMM PROCS implementation to trace the production of VN24 line for VINFAST project.
OEM: VINFAST


March 2019

LINCS EMEA-FRANCE-Compiegne
New LINCS adaptation to fit custmer’s particular needs. The workflow for ECS (Expedition Control System) marriage validation of re-printed sequence labels and traceability labels of the several parts is changed for the plant. Now the last step of the process will be able to scan either 2 labels of parts produced in different plants.
OEM: RENAULT

PROCS ASIA-CHINA-Wuhan
New PROCS implementation to trace the production of a new line. The stations of the line will be shared with several projects. Traceability is configured as required for each project.
OEM: RENAULT

PROCS EMEA-SPAIN-Martorell
New LINCS adaptations to fit custmer’s particular needs. System will include a new ECS (Expedition Control System) position to obtain each trolley identification by reading its barcode Datamatrix. This new ECS information will be combined with the Container ECS validation to determine the content of the whole container. In the end, the system will generate an interface for an external application. This project is part of an Artificial Vision project’s program.
OEM: SEAT

LINCS EMEA-MOROCCO-Kenitra
LINCS project implementation to sequence tanks in Long Range mode initially and JIT mode in the second phase of the project. System will include the Truck management with a specific ECS (Expedition Control System).
OEM: PSA

PROCS EMEA-NETHERLANDS-Roermond
New PROCS implementation to trace the production of a new line for B479 Fiesta model.
OEM: FORD

PROCS ASIA-INDIA-Pune
New PROCS implementation to trace the production of a new line for EURO 6D project.
OEM: FIAT


February 2019

PROCS EMEA-SPAIN-Vigo
Implementation of gIMM-PROCS to control the production process of a new line.
OEM: PEUGEOT

PROCS EMEA-SLOVAKIA-Kosice
Implementation of a new gIMM-PROCS line to control the production process for the new S class door panels.
OEM: MERCEDES BENZ

PROCS EMEA-SLOVAKIA-Kosice
Implementation of a new gIMM-PROCS line to control the production process for the new S class center consoles.
OEM: MERCEDES BENZ

PROCS EMEA-CZECH REPUBLIC-Mlada Boleslav
Implementation of a new gIMM-PROCS line to control the production process for the new Defender Instrumental Panels.
OEM: LAND ROVER

LINCS EMEA-SPAIN-Redondela
New LINCS project to deliver Front and Rear Bumpers of Model P24. Parts are sent in JIS flow to PSA Vigo Line1.
OEM: PEUGEOT

PROCS EMEA-CZECH REPUBLIC-Mlada Boleslav
Implementation of gIMM-PROCS to control the production process of a new line.
OEM: FORD


January 2019

LINCS ASIA-CHINA-Shenyang
New gIMM development to implement some functional validations on SYNCRO96ATP EDI file required by BMW, to ensure the correct processing when the ASA file is received.
OEM: BMW

PROCS ASIA-CHINA-Beijing
New giMM-PROCS implementation. The system will control the production process and store the traceability parameters for new lines formed by several workstations on this plant.
OEM: CUMMINS

LINCS AMERICA-USA-Sidney
New LINCS implementation to sequence in Long Range JIS the vehicle U625 to Ford manufacturing facility in Chicago. System will be adapted and configured to meet the particular requirements of the plant. System will be initially interfaced with the ERP QAD, and in second phase with PLEX.
OEM: FORD

WebPicking EMEA-SLOVAKIA-Trnava
New gIMM WebPicking is a paperless industrial application included in the group of gIMM Innovation Projects for industry 4.0. This software is able to show picking lists with the materials that operator must bring to the assembly lines in a web application without waste of paper for this task. The web application can be accessed by a browser installed in multiple devices such as PCs, iPads or Android Tablets. gIMM WebPicking will work in autonomous mode, and will interface with current sequencing system in place in the plant.
OEM: n/a

PROCS AMERICA-USA-Spring Hill
New gIMM-PROCS project to add new workstations to C1UX lines. This project includes the integration of production orders and master data (BOM) to PROCS.
OEM: GENERAL MOTORS

PROCS ASIA-CHINA-Wuhan
New gIMM-PROCS project to add a new workstation to manage raw materials for Volvo Line 2, in order to read the batches from a separated station.
OEM: VOLVO


December 2018

LINCS EMEA-SPAIN-Sant Andreu de la Barca
New project to implement the new version on LINCS and a series of functional changes required by de plant regarding SAP interfaces, new reports, integration of TSL-RECADV file, new Master Data structure and business rules, and implementation of LINCS Integration Module.
OEM: SEAT

LINCS EMEA-SPAIN-Martorell
New project to interface LINCS with an external artificial vision system in the cloud to automatically count the wheels delivered by the sequencing plant.
OEM: SEAT

PROCS ASIA-CHINA-Wuhan
New project with PROCS to implement a new line in the plant.This project is implementing RAW material workstations to manage batches via SILOs. This makes it easier the reading of the components in the workstations.
OEM: n/a

PROCS ASIA-CHINA-Foshan
New project with PROCS to implement a new line in the plant. gIMM has implemented a new type of workstation for this project: SLUSH SKIN. A Slush Skin Workstation is a machine for slush skins for producing automotive parts as instrumental or door panels. Consist in a kind of rotating plate with several positions where moulds (called shell) are placed for performing the slush process for different types of materials. The Station works with “productive families” instead of final products. The workstation has a monitoring screen that shows all the shells in the workstation with the different types of pieces that are produced, see what batches or skins it is using, the number of daily or total cycles, maintenance definition and options for manual printing.
OEM: n/a

PROCS ASIA-CHINA-Hangzhou
New project with PROCS to expand current A10 line.
OEM: n/a

PROCS EMEA-MOROCCO-Tanger
New project in PROCS to modify the current production workflow to split X52 and KJ lines due to new manufacturing needs (new components and increase of diversity)
OEM: RSA

WebPicking EMEA-FRANCE-Montbeliard
New project to implement WebPicking solution. This software is able to show picking lists with the materials that operator must bring to the assembly lines in a web application, without waste of paper for this task. The web application can be accessed by a browser installed in multiple devices such as PCs, iPads or Android Tablets. gIMM – WebPicking will work in autonomous mode. Current sequencing system information in the plant will be integrated with gIMM WebPicking via XML files.
OEM: PSA


November 2018

PROCS EMEA-MOROCCO-Kenitra
New project on gIMM-PROCS system to implement a new production line with new workstations for Raw Material, Injection, Backup Injection, Milling, VIB Welding, US Welding, Final Control and Rework to ensure that the traceability information is correctly stored during all the production process
OEM: PSA

LINCS EMEA-POLAND-Poznan
New project on LINCS system for the implementation of a new MCS [Module Control System]  Server in the plant and the configuration of a Vehicle Project for VW Caddy model.
OEM: VW

PROCS AMERICA-BRAZIL-Limeira
New project on gIMM-PROCS system for the implementation of “GM GEM – Canning and Welding” line. PROCS system will control the workstations for Brick Measurement, GBD Measurement, Marking, Brick Recovery, VCELL, Leak test, Screwing Bench and Packing.
OEM: GM

PROCS Competence Center
New project on gIMM-PROCS system to develop and implement a new functionality to allow checking minimum/maximum time from a date/time contained in the barcode of an external component. This new functionality is included in gIMM 4.0 version.
OEM: n/a

PROCS Competence Center
New project on gIMM-PROCS system to develop and implement a new functionality for native PDE3 stations to prohibit reworking parts with S&R fault. This new functionality is included in gIMM 4.0 version.
OEM: n/a

LINCS EMEA-SPAIN-Martorell
New project on LINCS system for implementing a new functionality to automatically control the number of wheels by an third partner.
OEM: SEAT

PROCS EMEA-SPAIN-Almussafes
New project on gIMM-LINCS and gIMM-PROCS to produce and deliver in JIT mode 3 new vehicle models.
OEM: FORD

PROCS AMERICA-USA-Louisville
New project on gIMM-PROCS system to implement new production line with new workstations for Leaktest, Final Assembly, Engraving, Gauge, Packout and Rework.
OEM: GM

PROCS EMEA-PORTUGAL-Braganza
New project on gIMM-PROCS system to implement new production line with new workstations for Stuffing, Leaktest Engraving, Rework Leaktest and Packing.
OEM: PSA

PROCS EMEA-SPAIN-Abrera
New project on gIMM-PROCS system to implement a new API interface for SAP declaration.
OEM: n/a


October 2018

PROCS AMERICA-USA-Columbus
New Project on gIMM-PROCS system that will control new workstations: Laser Etch and Etch Verification, Automatic Leak Check, Packout to Knockdown, Repair Station.
OEM: Cummins

PROCS AMERICA-MEXICO-San Luis Potosi
New Project on gIMM-PROCS system to implement new workstations for Autoreck In/Out, HDM, Vibration, Rework, Packout, Manual Stations, Torque, Tester, Laser Etch and Etch Verification, Automatic Leak Check, Packout to Knockdown and Repair Station.
OEM: Tesla

PROCS AMERICA-USA-Spring Hill
New project on gIMM-PROCS system to implement new workstations for Labeling, Manual Assembly-Preassembly, US Weld and Inspect+Light Guide+Tester functions.
OEM: General Motors

PROCS AMERICA-USA-Columbus
New project on gIMM-PROCS system to implement new workstations for Label Printing, Final Leak Check, Laser Etch, Final Visual Inspect Check, RFID Marriage and Rework.
OEM: Cummins

PROCS ASIA-INDIA-Ammavaru Palli
New project on gIMM-PROCS system to implement new workstations for Injection of Raw Material, Injection, Hot Pressing, Weakening by Milling, Vibration Welding, Assembly, Final Inspection and Rework .
OEM: Hyundai

PROCS ASIA-INDIA-Pune
New project with gIMM-PROCS system for FCM to implement new workstations for Measurement, Wighting & Wrapping, Stuffing, GBD Control, Marking & DMC Scan Control, Welding, Leak Test Engraving, Heatshield Crimping, Final Control, Packaging and Rework.
OEM: Fiat

PROCS ASIA-RUSSIA-Kaluga
New project to upgrade gIMM version installed to the latest version 4.0. and cumulative update.
OEM: PSA

PROCS ASIA-RUSSIA-Luga
New project to upgrade gIMM version installed to the latest version 4.0. and cumulative update.
OEM: Ford

PROCS EMEA-FRANCE-Meru
New project on gIMM-PROCS system to implement new workstations for PLS and MLTA.
OEM: PSA


August 2018

LINCS EMEA-Spain-Sant Andreu
Migration of LINCS sequencing system and adaptation of current system to new SAP of the customer
OEM: SEAT

LINCS EMEA-Spain-Martorell
Delivery Execution System for components for new Audi A1 assembled in SEAT Martorell Factory.
OEM: SEAT

LINCS AMERICA-USA-Holmesville
Implementation a new LINCS system in new customer plant in USA for sequencing parts from FORD. The LINCS system must be integrated with the ERP PLEX
OEM: FORD

PROCS EMEA-Spain-Vigo
Implementation of a new gIMM-PROCS line to control the production process for 9 new stations.
OEM: n/a

PROCS EMEA-Slovakia-Hlohovec
Implementation of a new gIMM-PROCS line to control the production process for a 20 new stations.
OEM: n/a


July 2018

LINCS EMEA-Moroco-Kenitra
Implementation a new LINCS system in new customer plant for sequencing parts from PSA
OEM: PSA

PROCS EMEA-United Kingdom -Fradley
Implementation of a new signal to send to the PLC when an unexpected part is scanned to allow activating ancillary visual and auditory signaling devices.
OEM: JLR

LINCS EMEA-Spain-Vitoria
Implementation of a new adaptation requirement in the LINCS system to integrate a new invoice format in Daimler Vitoria
OEM: Daimler

LINCS EMEA-Slovakia-Lozorno
Implementation of new functionalities for truck management (including option to manually assign containers to truck) and adaptations in delivery note in current LINCS system
OEM: PAG

PROCS EMEA-France-Meru
Implementation of gIMM-PROCS for the production of Instrumental Panels for line B10.
OEM: PSA

PROCS EMEA-Spain-Vigo
Acquisition of GIMM PROCS licenses for a future line extension
OEM: PSA

LINCS EMEA-Slovakia-Hlohovec
Adaptation of current LINCS system for project A9 PSA deliveries in HLOHOVEC plant, the necessary changes to add new workflow for project P21 with CRM system
OEM: PSA

PROCS EMEA-Spain-Abrera
Implementation of a new gIMM-PROCS line to control the production process for exhaust products .
OEM: n/a


June 2018

PROCS EMEA-Germany-Peine
Implementation a new gIMM Requiriment for native PDE3 protoco to allow manging a set of parts in a single bach identified with a single ID.
OEM: n/a

PROCS AMERICA-Mexico-Hermosillo
Implementation of a new gIMM-PROCS line to control the production process for a new plant in MEXICO
OEM: FORD

PROCS AMERICA-USA-Louisville
Implementation of a new gIMM-PROCS line to control the production process for a new plant in USA
OEM: FORD

LINCS EMEA-France-Pfastatt
Implementation and configuracion a LINCS System for Generation of EDIFACT INVRPT D96A files for consumption and delivery purposes
OEM: PSA

LINCS EMEA-Spain-Vitoria
Generation of a CSV file for each container validated. The files include information from PROCS. The files are integrated by an external system called PLEX
OEM: Daimler

PROCS EMEA-Italy-Terni
Implementation of a new gIMM-PROCS line to control the production process for 8 new stations (D600 Line).
OEM: FCA

PROCS EMEA-France-Audincourt
Implementation of a new functionality to Upload the traceability files to the external repository with the content limited in size and zipped using gzip standard.
OEM: –

LINCS EMEA-United Kingdom -Fradley
Implementation of gIMM for the integration, production and JIT delivery of the existing model L560 for the new location India.
OEM: JLR


May 2018

PROCS EMEA-France-Meru
Implementation of gIMM-PROCS for the production of Door Panels for line D34.
OEM: PSA

LINCS / IDPS ASIA PACIFIC-China-Shenyang
Implementation of Delivery & Manufacturing Execution System (gIMM LINCS & PROCS) for a Seating plant. BMW JIS5000 flow.
OEM: BMW

LINCS EMEA-France-Saint Desirat
Implementation of new ECS for Uppers kitting process parts for RSA
OEM: RSA

PROCS EMEA-Spain-Paterna
Implementation of gIMM-PROCS for Research & Development plant. Grand Opening projects
OEM: ALL (I+D+I)

PROCS ASIA PACIFIC-China-Shenzhen
Implementation of gIMM-PROCS for Foam, Frame and Cover preparation and Seat assembly lines.
OEM: Faurecia-BYD

PROCS AMERICA-Mexico-Querétaro
Implementation of new gIMM-PROCS Line for the production of exhaust for lines Omega & Corvette in Mexico
OEM: FORD

PROCS EMEA-Slovakia-Nitra
Deployment of a line of 8 workstations for producing tanks for JLR
OEM: JLR


April 2018

PROCS – EMEA-France-Meru
Implementation of gIMM PROCS for new Plant Project D34 IP
OEM: PSA

PROCS – EMEA-France-Meru
Implementation of giMM PROCS for new Plant Project D34 DP
OEM: PSA

PROCS – EMEA-Czech Rep.-Pardubice
Rollout of gIMM PROCS in BMW F400 CC line
OEM: BMW

PROCS – EMEA-Italy-Terni
Rollout of gIMM PROCS in new line D631
OEM: FIAT

PROCS – ASIA PACIFIC-China-Shenzhen
Rollout of new implementation of gIMM PROCS for BYD program
OEM: N/A

LINCS – EMEA-Spain-Villaverde
Migration of rvsJIT to new version Runblocks and new SAP server
OEM: PSA

PROCS – EMEA-Mexico-Queretaro
Implementation of gIMM PROCS
OEM: GM – FCA

PROCS – ASIA PACIFIC-China-Hangzhou
Implementation of gIMM PROCS
OEM: n/a

PROCS – EMEA-Czech Rep.-Pisek
Implementation of new workstations on gIMM PROCS for program Ford B515
OEM: FORD


March 2018

PROCS – EMEA-Czech Rep.-Pisek
Implementation of gIMM PROCS for program Volvo
OEM: VOLVO

PROCS – EMEA-Italy-Terni
Implementation of gIMM PROCS for program D511 Jeep Fiat
OEM: JEEP

LINCS – EMEA-Spain-Pamplona
Implementation of gIMM LINCS for sequencing VW T-Cross
OEM: VW

 PROCS – EMEA-France-Beaulieu
Implementation of gIMM PROCS
OEM: PSA


February 2018

PROCS – EMEA-Turkey-Kocael
Implementation of gIMM PROCS in IP and DP lines RSA
OEM: RSA

 PROCS – EMEA-Netherlands-Roermond
Implementation of gIMM PROCS for program B479
OEM: FORD


January 2018

LINCS – EMEA-Belgium-Gent
Implementation of gIMM LINCS for Long Distance sequencing for Volvo
OEM: VOLVO

PROCS – EMEA-Spain-Orcoyen
New WS in PROCS for line F545 Nissan
OEM: NISSAN

 LINCS – EMEA-Slovakia-Trnava
Implementation of Synchron connector with PSA (Corail and SyncIP)
OEM: PSA

 PROCS – ASIA PACIFIC-China-Dalián
Implementation of gIMM PROCS for program P71A IP Nissan
OEM: NISSAN

PROCS – ASIA PACIFIC-China-Wuhan
Implementation of gIMM PROCS for program R83
OEM: n/a

 PROCS – EMEA-Czech Rep.-Mlada Boleslav
Implementation of new workstations on gIMM PROCS for program JMK4
OEM: FORD / VW

 LINCS – EMEA-Spain-Vigo
Implementation of LINCS for sequencing in Long Range PSA Plant in Mangualde
OEM: PSA


December 2017
PROCS – EMEA-France-Bains-sur-Oust
Bains-sur-Oust BSO C84E gIMM-PROCS implementation
OEM: PSA

December 2017
LINCS – EMEA-France-Guichen
Add new line sequencing in LINCS
Migration to last version of Runblocks and OS/SQL servers
OEM: PSA

December 2017
LINCS – EMEA-Slovakia-Hlohovec
New LINCS system for sequencing to JLR Plant in Nitra
OEM: JLR

December 2017
PROCS – EMEA-Slovakia-Kosice
Implementation of gIMM PROCS in program AU326 IP for AUDI
OEM: AUDI

November 2017
PROCS – EMEA-Romania-Arges
Arges C519IP & D952IP gIMM-PROCS implementation
OEM: n/a

November 2017
PROCS – EMEA-South Africa-Cape Town
Implementation of gIMM PROCS for program VW T6 Panther
OEM: VW

November 2017
LINCS – EMEA-Spain-Martorell
Migration of SUMA application to 64bits Platform
OEM: SEAT

November 2017
PROCS – EMEA-South Africa-Cape Town
Within implementation of gIMM PROCS project, add new WS
OEM: n/a

November 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Implementation of new workstations on gIMM PROCS for program SRCoF FIAT
OEM: FIAT

October 2017
PROCS – ASIA PACIFIC-China-Foshan
Implementation of gIMM PROCS for program VW276
OEM: VW

October 2017
PROCS – EMEA-France-Messei
Implementation of new workstations on of gIMM PROCS for program RSA H79
OEM: RSA

October 2017
PROCS – EMEA-Brasil-Limeira
Implementation of gIMM PROCS for program Blue Cummins
OEM: n/a

October 2017
PROCS – EMEA-Germany-Peine
Implementation of gIMM PROCS for program AU536
OEM: AUDI

September 2017
LINCS – EMEA-Spain-Martorell
LINCS system adjustments to include new AUDI A1 requirements
OEM: AUDI

September 2017
PROCS – EMEA-Russia-Luga
Implementation of new workstations on gIMM PROCS for program K0
OEM: FORD

September 2017
PROCS – EMEA-South Africa-Port Elizabeth
Implementation of gIMM PROCS for program VW Panther 7A
OEM: VW

September 2017
PROCS – EMEA-Czech Rep.-Pisek
Implementation of gIMM PROCS for program DV NEO L4
OEM: PSA

September 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Implementation of gIMM PROCS in JMK3 line
OEM: VW

September 2017
PROCS – EMEA-Czech Rep.-Pisek
Pisek – Volvo DP L4 (D484-D464) – gIMM-PROCS
OEM: VOLVO

September 2017
PROCS – EMEA-Brasil-Limeira
Limeira- ARAMIS Product- 3 new stations gIMM-PROCS
OEM: CUMMINS

September 2017
PROCS – EMEA-South Africa-Cape Town
Implementation of gIMM PROCS in line 1065
OEM: n/a

August 2017
LINCS – EMEA-Germany-Kandel
Develop and implement of the new functionality to perform picking operations using a tablet devices
OEM: Daimler

August 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Mlada Boleslav-Fox Ulev Line 2-gIMM-PROCS
OEM: FORD

August 2017
PROCS – EMEA-Portugal-Bragança
Bragança – New VS20 line – gIMM-PROCS
OEM: DAIMLER

August 2017
PROCS – EMEA-Mexico-Queretaro
Implementation of gIMM PROCS in TCO lines
OEM: GM
FCA

August 2017
PROCS – EMEA-Mexico-Queretaro
Implementation of gIMM PROCS in TCO lines
OEM: GM
FCA

July 2017
LINCS – EMEA-France-Fontaine
Implementation of LINCS system for tailgate deliveries, Long Range sequencing from Fontaine to PSA Sochaux.
SyncIP communication services implementation for PSA connection and message reception.
Picklist and Container validation system (ECS)
Interfaces to declare stock movement and declare handling unit numbers directly in customer SAP.
OEM: PSA

July 2017
PROCS – EMEA-Spain-Orkoien
Orkoien – Line 830 – gIMM-PROCS
OEM: VW

July 2017
PROCS – EMEA-Germany-Rottemburg
Onsite suppot implementing gIMM PROCS in line MFA2
OEM: BMW

July 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
gIMM-PROCS Implementation for trazability of model AU58x
OEM: AUDI

July 2017
PROCS – EMEA-Portugal-Bragança
Bragança – K9K Line 2 – gIMM-PROCS
OEM: RSA

June 2017
PROCS – EMEA-Spain-Abrera
gIMM-PROCS Implementation for trazability of model AU270IP
OEM: AUDI

June 2017
PROCS – EMEA-Spain-Vitoria
Integration or new WS in gIMM PROCS system
OEM: n/a

June 2017
LINCS – EMEA-Spain-Villaverde
Roll-out of Corail connector for PSA Villaverde
OEM: PSA

June 2017
PROCS – EMEA-Spain-Zaragoza
Implementation of gIMM-PROCS in the plant
OEM: OPEL

June 2017
PROCS – EMEA-Slovakia-Hlohovec
Implementation of gIMM-PROCS for program X540 and X590
OEM: JLR

June 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Implementation of gIMM-PROCS in JMK2 line
OEM: VW

June 2017
PROCS – EMEA-France-Meru
Méru-13 Injection ws+1 Raw Material for All projects-gIMM-PROCS
OEM: PSA

May 2017
LINCS – AMERICA-Brasil-Reydel
Rollout of Synchron in Reydel Plant for PSA (SyncIP), jointly with T-Systems Brasil
OEM: PSA

May 2017
LINCS – EMEA-Germany-Kandel
Additional modification in the LINCS Implementation project to add new CKD flow in Daimler
OEM: DAIMLER

May 2017
LINCS – EMEA-Slovakia-Hlohovec
Additional modification in the LINCS Implementation project to add truck management and Andon board monitoring screen
OEM: PSA

May 2017
LINCS – EMEA-Slovakia-Lozorno
Implementation of gIMM-LINCS for sequencing Lamborghini vehicle parts
OEM: LAMBORGHINI

May 2017
PROCS – EMEA-Germany-Augsburg
Augsburg DEUTZ project gIMM PROCS
OEM: n/a

May 2017
LINCS – AMERICA-USA-Newark
Implementation of new connector for EDI exchange with TESLA manufacturer
OEM: TESLA

May 2017
PROCS – EMEA-Spain-Orcoyen
Implementation of modifications in gIMM-PROCS for line 810
OEM: VW

April 2017
LINCS – EMEA-Spain-Vigo
Adaptation of LINCS system to new customer CRM and integration of new PSA model K9
OEM: PSA

April 2017
PROCS – EMEA-Mexico-Queretaro
Implementation of gIMM-PROCS in assembly lines
OEM: GM
FCA

April 2017
PROCS – EMEA-France-Bains-sur-Oust
Bains-sur-Oust New project BSO-5 Conformity & Packing stations for PFU / PLS
OEM: n/a

April 2017
LINCS – EMEA-France-Compiegne
Adaptation of LINCS system with additional L3PS and ECS
OEM: RSA

April 2017
PROCS – EMEA-South Africa-Cape Town
Cape Town – DRAGON PFI & GTDI CAP-gIMM-PROCS
OEM: n/a

April 2017
PROCS – EMEA-South Africa-Cape Town
Cape Town – Panther line – gIMM-PROCS
OEM: n/a

March 2017
PROCS – ASIA PACIFIC-China-Wuhan
Implementation of gIMM-PROCS for program DP27
OEM: n/a

March 2017
PROCS – ASIA PACIFIC-India-Chennai
Implementation of gIMM-PROCS for program B515 MCA
OEM: FORD

March 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Mlada Boleslav FECT – Ford FOX – gIMM-PROCS
OEM: FORD

March 2017
PROCS – EMEA-Mexico-Queretaro
Queretaro 1 Canning Line TCO FECT T1XX project-gIMM-PROCS with more than 100 Workstations
OEM: GM
FCA

March 2017
PROCS – EMEA-Mexico-Queretaro
Implementation of gIMM-PROCSin canning line
OEM: GM
FCA

March 2017
PROCS – EMEA-Brasil-Limeira
Limeira –JMK Line – gIMM-PROCS
OEM: CUMMINS

March 2017
LINCS – EMEA-Spain-Barcelona
Development of modification integrating external JIT and new order message
OEM: n/a

March 2017
PROCS – EMEA-France-Messei
Messei – CMF1 – gIMM-PROCS
OEM: RSA

March 2017
LINCS – EMEA-Slovakia-Hlohovec
Implementation of LINCS system for front/rear bumper sequencing from Hlohovec to PSA Plant in Trnava.
Corail V2 communication services implementation for PSA connection and message reception.
Container and truck validation system (ECS)
OEM: PSA

March 2017
PROCS – EMEA-Italy-Terni
Implementation of gIMM-PROCS for programs D571C and D495D
OEM: MASERATI

February 2017
PROCS – EMEA-Slovakia-Hlohovec
Hlohovec X540 Line-gIMM-PROCS
OEM: n/a

February 2017
PROCS – EMEA-Portugal-Bragança
Implementation of gIMM-PROCS for program F460 EP6.2 GPF
OEM: PSA

February 2017
LINCS – EMEA-Spain-Martorell
Configuration of new ECS in LINCS including preprod with sequencing status
OEM: SEAT

February 2017
LINCS – EMEA-Spain-Vigo
New configuration of the LINCS system for adapting to the new communication system of PSA
OEM: PSA

February 2017
STOCS – EMEA-Portugal-Palmela
Implementation of gIMM-STOCS systems for managing customer MKL warehouse, with more than 4000 positions. New system is fully integrated with existeng gIMM LINCS system
OEM: VW

January 2017
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Implementation of gIMM-PROCS for program AU58x AUDI
OEM: AUDI

January 2017
PROCS – EMEA-South Africa-Port ELizabeth
Port Elizabeth – Additional stations for MQB A0 project-gIMM-PROCS
OEM: VW

January 2017
LINCS – EMEA-France-Rennes
Configuration of modifications to LINCS system in order to adapt the system to a co-sequencing delivery with other Tier-1 supplier
OEM: PSA

January 2017
PROCS – EMEA-Netherlands-Roermond
Roermond DAF MY17 – gIMM-PROCS (autoimplementation by the customer)
OEM: DAF

January 2017
LINCS – EMEA-France-Pfastatt
Configuration of modifications for adapting LINCS system to new PSA line requirements for PSA Sochaux
OEM: PSA

January 2017
PROCS – EMEA-Italy-Terni
Terni – D573 line – gIMM-PROCS
OEM: GM

January 2017
PROCS – AMERICA-USA-Columbus
UC972 – PDE3 Upload to MII from production workstations
This use case defines a new functionality for native PDE3 stations to allow
uploading production information to an external system (MII).
OEM: CUMMINS

January 2017
PROCS – AMERICA-USA-Columbus
Columbus South TCO FECT CSM NITRO Line-gIMM-PROCS
OEM: CUMMINS

January 2017
PROCS – EMEA-Czech Rep.-Pisek
Pisek – DV NEO L2 – gIMM-PROCS
OEM: FORD

December 2016
PROCS – EMEA-Slovakia-Kosice
Kosice AU58xIP Line-gIMM-PROCS
OEM: AUDI

December 2016
LINCS – EMEA-Spain-Sant Andreu de la Barca
Rollout of modifications of LINCS – Kitting system
OEM: SEAT

December 2016
PROCS – EMEA-Czech Rep.-Pisek
New WS in gIMM-PROCS systems
OEM: FORD

December 2016
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Mlada Boleslav – New VW line – gIMM-PROCS
OEM: VW

November 2016
LINCS – AMERICA-USA-Freemont
Rollout of a new LINCS to sequence parts to TESLA manufacturer
OEM: TESLA

November 2016
LINCS – EMEA-Slovakia-Lozorno
Assessment to customer for improving systems performance
OEM: VW

November 2016
LINCS – EMEA-Poland-Poznan
Configure new part families in current Lincs.
OEM: VW

November 2016
LINCS – EMEA-Spain-Sant Andreu de la Barca
Development and Rollout of the new feature of Acceleration Plan
OEM: SEAT

November 2016
PROCS – EMEA-Portugal-Bragança
Implementation of gIMM-PROCS for program K9K
OEM: RSA

October 2016
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Mlada-Boleslav – Fox Ulev line – gIMM-PROCS
OEM: FORD

October 2016
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Apaptation of gIMM-PROCS system for new FIAT line
OEM: FIAT

October 2016
LINCS – EMEA-Spain-Martorell
Modification of LINCS system in standard assemblies
OEM: SEAT

October 2016
LINCS – EMEA-Spain-Vitoria
Development and rollout of new Weppicking feature in gIMM LINCS
OEM: DAIMLER

October 2016
PROCS – EMEA-Slovakia-Kosice
Kosice PO536 IP – gIMM-PROCS
OEM: PAG

October 2016
PROCS – EMEA-Portugal-Bragança
New workstations for L538 AJ200 project to increase the capacity of the line
OEM: PSA

October 2016
PROCS – EMEA-Italy-Terni
New plant: Terni, project: D477 Alfa Romeo Giorgio – Line 1 -gIMM-PROCS
OEM: ALFA ROMEO

October 2016
PROCS – EMEA-Slovakia-Hlohovec
Hlohovec PO536 – gIMM-PROCS
OEM: PAG

October 2016
PROCS – EMEA-Portugal-Bragança
New workstations for H4H5 line to increase the capacity of the line
OEM: PSA

October 2016
PROCS – EMEA-Netherlands-Roermond
Roermond – V-Cell A Gen II – gIMM-PROCS.
OEM: n/a

September 2016
PROCS – EMEA-Germany-HerrenbergOrkoien
Herrenberg FECT EAV3 line gIMM-PROCS
OEM: n/a

September 2016
PROCS – EMEA-South Africa-Port ELizabeth
Port Elizabeth – MQB A0 – gIMM-PROCS
OEM: VW

September 2016
LINCS – EMEA-Spain-Arevalo
Modifications of L3PS in gIMM LINCS system
OEM: n/a

September 2016
PROCS – EMEA-Czech Rep.-Mlada Boleslav
Mlada – JMK line – gIMM-PROCS
OEM: VW
FIAT

September 2016
PROCS – EMEA-Spain-Barcelona
Workstation production monitoring – Phase 2
New funcionalities for Line production monitoring,KPI’s calculation an alarms generation.
OEM: n/a

August 2016
PROCS – EMEA-France-Meru
Meru-AS1 line-gIMM-PROCS
OEM: n/a

August 2016
PROCS – EMEA-South Africa-Cape Town
Cape Town-Dragon PFI-gIMM-PROCS
OEM: FORD

July 2016
PROCS – EMEA-Czech Rep.-Pisek
Pisek – A16 line – gIMM-PROCS
OEM: n/a

July 2016
LINCS – EMEA-Slovakia-Lozorno
System Modifications and upgrades in LINCS
OEM: PAG

July 2016
PROCS – ASIA PACIFIC-China-Foshan
Foshan FECT VW line gIMM-PROCS
OEM: VW

July 2016
PROCS – EMEA-Czech Rep.-Pisek
New line has been configured to trace the parts produced for Ford Fox Classic
OEM: FORD

July 2016
LINCS – EMEA-France-Nanterre
Rollout of new MCS system feature in LINCS. MCS is a checkingtool to verify OEM EDI conformity against BOM.
OEM: n/a

June 2016
PROCS – EMEA-Czech Rep.-Pisek
Pisek D465B line gIMM-PROCS
OEM: n/a

June 2016
LINCS – EMEA-Spain-Sant Andreu de la Barca
Implementation of new ECS Picking in gIMM LINCS, adapted to SE370PA modelOEM: SEAT

June 2016
PROCS – EMEA-Germany-Augsburg
Augsburg -EAV3-gIMM-PROCS
OEM: n/a

June 2016
PROCS – EMEA-Czech Rep.-Pisek
Pisek KH4 line gIMM-PROCS
OEM: n/a

June 2016
PROCS – EMEA-Spain-Abrera
gIMM PROCS Implementation for trazability of model SE270IP
OEM: SEAT

June 2016
PROCS – EMEA-Spain-Vigo
Vigo FECT H4-H5 line gIMM-PROCS
OEM: PSA

June 2016
PROCS – EMEA-Spain-Barcelona
Workstation production monitoring – Phase 1
New funcionalities for Line production monitoring,KPI’s calculation an alarms generation.
OEM: n/a

June 2016
LINCS – EMEA-Spain-Polinya
Polinya, Spain. The plant will start sequencing rear bumpers for new car model SE270 (SEAT Ibiza)
OEM: SEAT

May 2016
LINCS – EMEA-Spain-Martorell
Martorell, Spain. The plant is adapting its LINCS system in order to implement the VW standards for JIT communication.
OEM: SEAT

May 2016
LINCS – EMEA-Spain-Almussafes
Almussafes, Spain. Current installed LINCS will be modified to update the transcoding rules for the DP C520 Vignale model.
OEM: FORD

May 2016
LINCS – EMEA-Spain-Abrera
Abrera, Spain. The plant will start sequencing an intermediate part for the gear shifts of Audi Q3 model. For this purpose, its current LINCS system will be updated to manage this new parts.
OEM: SEAT

May 2016
GIMM – EMEA-Czech Republic-Pisek
Pisek, Czech Republic. The plant will upgrade its current gIMM installed to version 4.0 RTM
OEM: n/a

May 2016
PROCS – EMEA-Spain-Arevalo
Arevalo, Spain. The plant is implementing new workstations controled by gimm-PROCS (X95 FT- X83 FT- A7 FT- A7 FP).
OEM: n/a

May 2016
LINCS – EMEA-Spain-Vitoria
Vitoria, Spain. The plant requests to connect LINCS to a PLC that will validate several components. The LINCS’ ECS system will take obtain the information reported by the PLC to confirm the validation of the component.
OEM: MBE

May 2016
GIMM – EMEA-Spain-Barcelona
gIMM core model will be updated by a customer request to define a new set of reports for checking traceability data.
OEM: n/a

May 2016
PROCS – EMEA-France-Theillay
Theillay, France. The plant will implement a new project BVH1.
OEM: PSA

May 2016
PROCS – EMEA-Portugal-Bragança
Bragança, Portugal. The plant will update its line JMK 1.
OEM: n/a

May 2016
gIMM (JISJIT+PROCS) – EMEA-England-Fradley
Fradley, Great Britain. The plant is unifying in one gimm PROCS, two existing lines and will add a new one.
OEM: JLR

May 2016
PROCS – EMEA-Turkey-Golcuk
Golkuc, Turkey. The plant is configuring its current gimm PROCS system.
OEM: n/a

May 2016
PROCS – EMEA-Czech Republic-Pisek
Pisek, Czech Republic. The plant will implement on the existing gimm PROCS 2 new lines VEA 1.1 and 1.2.
OEM: VOLVO

May 2016
PROCS – EMEA-Portugal-Bragança
Bragança, Portugal. The plant will implement a new line JMK 2 on current gimm PROCS system installed.
OEM: n/a

May 2016
PROCS – EMEA-Netherlands-Roermond
Roermond, Holand. The plant will implement 1 screwing new station for F385B-SCANIA project on its current gIMM PROCS system.
OEM: SCANIA

May 2016
PROCS – EMEA-Spain-Abrera
Abrera, Spain. gIMM will be updated to include new functionalities requested by the plant. These modifications consist on defining a new production method for NISSAN lines: X60, X11 and X11 Components and adapt current production lines to the new needs.
OEM: NISSAN

April 2016
LINCS – EMEA-France-Guichen
Guichen, France. The plan will update its current gimm LINCS to implement a new line for sequencing Front and Rear bumpers for new PSA P87 car model .
OEM: PSA

April 2016
PROCS – EMEA-Spain-Almussafes
Almussafes, Spain. The plant is updating its gimm PROCS to implement a new project (DP C520 Vignale).
OEM: FORD

April 2016
LINCS – EMEA-France-Nanterre
Nanterre, France. A new tool will be developed to control the consistency of modules included in the OEM JIS signals. This consistency will be automatically validated by the new system according to standard rules defined by the key user for an specific car project.
OEM: VW
PAG

April 2016
LINCS – EMEA-Spain-Martorell
Martorell, Spain. The plant is installing gimm LINCS for the management of a new JIT/JIS system. The system will include an ECS to verify the containers load, degraded mode processes, out of sequence processes, record of destiny arrival, and product status monitoring.
OEM: SEAT

March 2016
PROCS – ASIA PACIFIC-China-Foshan
Foshan, China. The plant will implement a new project for FIAT 523/553 IP on the existing gIMM-PROCS installation. T
OEM: FIAT

March 2016
GIMM – EMEA-Spain-Barcelona
new functionalities added to gIMM.
gIMM Core Model has been updated to satisfy some customers requirements.
– Add a new step to the PDE3 handshake to wait until process time is elapsed
– New type of device for sending monitoring data of the PDE3 workstations
– New optional parameter “Packing Material” and “Customer”on Open Container
functions for PDE3 Native.
– Several modifications in how the report ““Flow Items with GBD Values” is configured, and executed (improved performance).
OEM: n/a

March 2016
PROCS – EMEA-France-Bains-sur-Oust
The plant will configure a new production line in gIMM-PROCS, named with the project code P87.
OEM: PSA

March 2016
LINCS – EMEA-Spain-Almussafes
Almussafes, Spain. The plant is updating its LINCS system to accomodate a new barcode scanner model
OEM: FORD

February 2016
LINCS – EMEA-Spain-Martorell
Martorell, Spain. The plant is adapting its LINCS system in order to implement the VW standards for JIT communication.
OEM: SEAT

February 2016
PROCS – EMEA-Spain-Orcoyen
Orcoyen, Spain. The plant is implementing a new CD4 line with 2 workstations: Leaktest and Packing.
OEM: RSA

February 2016
PROCS – EMEA-Spain-Tarazona
Tarazona, Spain. The plant is creating a new backup line for the TPO subassembly line, Flaming, Gluing and Covering. Parts can be produced indistinctly on original and backup stations. The existing gimm-PROCS will be configured to managed this new line.
OEM: DAIMLER

January 2016
gIMMNew gimm 4.0 RTM version release
The main improvements of this version are the following:New user interface: Updated user interface in order to be more intuitive and user friendly, as well as upgrading the programming technologyNew Crystal Reports printing engine: Better printing engine to improve printing speed and reliabillityNew .NET 4.6 framework support: Upgraded to the leatest .NET framework

January 2016
PROCSEMEA-France-Theillay
Theillay, France. New line for Plancher Mégane RSA to implement gimm-PROCS. PROCS system will control four new workstations for Scale SMC, Molding, Virtual Control and Packaging. The plant will use the system to control the production process of composites, and their packaging into containers.

January 2016
PROCSASIA PACIFIC-China-Wuhan
Wuhan – Upgrade gIMM-PROCS to 3.12
Wuhan (PR China). The plant will upgrade the current PROCS version 2.5 installed on the plant to the latest 3.12.0. The new version will be deployed in 6 lines with a 21 workstations.
Profaces are used as HMI supporting Chinese character translation.”

January 2016
PROCSASIA PACIFIC-China-Wuhan
Wuhan – gIMM PROCS Implementation TX9
Wuhan (China). The plant produces the Instrumental Panels for a new model of the joint venture Dongfeng Peugeot-Citroën car manufacturer, named with the project TX9. The process controlled by PROCS assures the correct assembly of the components (Glovebox, Airbag, Air Channels, etc), interacts with the machines on the production line and stores all the relevant security data collected on the line. PROCS will manage 10 workstations.

January 2016
LINCSEMEA-Germany-Kandel
New plant: Kandel – LINCS
Kandel (Germany). The plant will implement a LINCS sequencing system in order to supply to Daimler Wörth plant in Germany 3 types of goods: “Blende” and the upper and lower part of footstep (Einstieg). The system will implement the standar functionalities: message processing, Container management, sequence and container labels printing, warning system, ECS system for sequence and truck validation and SAP file generation. Additionally it will include a Redelivery function in case OEM requests a part to be delivered again, and a picking list printing with the location of the parts in the stock warehouse.

January 2016
LINCSEMEA-Slovakia-Lozorno
New plant: Lozorno VW – LINCS
The plant will implement one LINCS system to set up a sequencing system for Porsche Leipzig plant deliveries. The parts that the system willl manage will be front and rear bumpers for VW models (Cayenne, Touareg and Up). The system will implement the standar functionalities: message processing, container management, sequence and container labels printing, warning system, ECS system for sequence and SAP file generation.

January 2016
LINCSEMEA-Slovakia-Lozorno
New plant: Lozorno Porsche – LINCS
The plant will implement one LINCS system to set up a sequencing system for Volkswagen Bratislava deliveries. Front and Rear bumpers will be sequenced from forecast files, then parts will be delivered and sent to Logistic Operator who will manage final delivery to OEM. The system will implement the standar functionalities: message processing, container management, sequence and container labels printing, warning system, ECS system for sequence and SAP file generation. Additionally it will have a Manual Launch function to allow the user start manually the delivery process for one vehicle. A special interface will be developed to coordinate production on SAP and LINCS system and a TSL module generation file to send SAP and Porsche.

December 2015
PROCSEMEA-Portugal-Bragança
Evolution of H4H5 line
The plant is changing the line H4H5 to deploy 5 new workstations for Canning/Picking, Leakage/Engraving, Riveting, Final Control and Packaging and will remove the Geometry Control Workstation. All the workstations will be configured with gIMM PROCS.
The reason for this change is to increase the line capacity of the current line, defining a new one in parallel sharing some of the operations. This change will allow the plant to have 2 lines in parallel producing the same parts.

December 2015
PROCSEMEA-Portugal-Bragança
Bragança 2 – L538 AJ200 Petrol D8 – gIMM PROCS
PROCS system will control 8 new workstations for Bragança 2 L538 AJ200 Petrol D8 FECT project. The new workstations will perform Welding, Leaktest, Grass Shield bet assy, Heatshield, Final control and Packaging functions. These workstations are used to produce and pack exhaust pipes, and the plant will use the traceability system to make conformity checks, store process parameters, and print the corresponding production labels.

November 2015
PROCSEMEA-_Belgium-Gent
Gent -Upgrade gIMM version to 3.12 SP2
The plant will upgrade to gIMM version from 3.9 to 3.12 SP2 in order to obtain the new functionalities.
The Plant assembles interior parts for Volvo Car Company, using gIMM LINCS to deliver JIT parts and gIMM-PROCS as traceability system.
The plant is using Pick To Light systems to control picking parts of assembly, gIMM-PROCS for ensuring the conformity of parts for assemble and connection to PLC’s to send the program to be run on them and store machine cycles results, and SCS systems are used to ensure the container filling with parts to be sent to the OEM assembly line.

November 2015
PROCSEMEA-Slovakia-Hlohovec
Hlohovec – Migration of PROCS to 3.12 (R231IP,R231DP,VW120IP,AC217,A9IP)
The plant is producing the Instrumental Panels and Door Panels for several models of Daimler, Volkswagen and PSA Group. There are in total 5 production lines controlled by PROCS. This plant is working with PROCS since 2006 (one of the first PROCS installations) and had several PROCS systems controlling various production lines. At the beginning of this year, all these lines have been grouped and joined in a single PROCS system 3.12.

November 2015
PROCSASIA PACIFIC-Masan-South Korea
Upgrade PROCS to version 3.12 (L38-43)
The plant is producing the Instrumental Panels for 2 models of Samsung-Renault car manufacturer (joint venture), identified with project codes L38 and L43. The production lines have a total amount of 15 workstations. This plant is working with PROCS since 2009 and at the beginning of 2016 the version is upgraded to PROCS 3.12, a more standardized, improved and stable one.

November 2015
PROCSEMEA-Portugal-Bragança
Bragança-DV NEO-Phase 1- gIMM-PROCS
The plant will deploy gimm PROCS for the project DV NEO. During the 1st phase of the project 7 new workstations will be configured for PROCS. The stations will perform Stuffing, Geometrical Control, Welding, Leakening and Engraving, Heatshield Crimpling and Labeling, Packing, Rework and Recovery functions.
These workstations are used to produce, pack, and rework exhaust pipes.

November 2015
PROCSEMEA-Slovakia-Hlohovec
Hlohovec – B618IP gIMM PROCS Implementation
The plant has the need of producing the Instrumental Panels for a new vehicle of Ford car manufacturer. Linked to the project, 1000648028, in a second step, this new line is setup on PROCS 3.12 (a subsequent step of the upgrade). This new line will have a total of 13 workstations, sharing some of them with the other vehicles already being produced.

November 2015
PROCSEMEA-South Africa-Cape Town
New plant: Cape Town – Packing conformity – gIMM-PROCS
The plant will implement gIMM-PROCS system for its Packing Conformity project. gIMM-PROCS will control 20 new workstations.
This line is used to pack exhaust pipes into containers, making a conformity check for all the read parts.

July 2015
PROCSEMEA-Spain-Vigo
New application WinIDPSPresec
The plant will implement a new application to check picking lists.
In order to avoid common printings for picking lists, a Web Application connected to the sequencing system will be developed to show the operators the parts to be picked and sent to the production line to assembly the parts. Multiple algorithms of picking will be developed. As result the plant will be able to save money in paper and printer supplies to do these tasks and accomplish part of their commitment with the environment by reducing the environmental impact of their activity.

July 2015
PROCSEMEA-Turkey-Kocaeli
New plant: Kocaeli – Panther Project F398 – gIMM-PROCS
The plant will implement gIMM-PROCS system for Kocaeli Panther Project F398. The line will have 6 workstations for Welding, Leaktest Engraving, Heatshield and Labeling and Screwing and Labeling.
These workstations are used to produce exhaust pipes, and the plant will use the traceability system to make conformity checks, store process parameters, and print the corresponding production labels.

July 2015
PROCSEMEA-Czech Republic-Mlada
W176 Migrate to 3.12
Plant line W176 will upgrade its gIMM-PROCS version installed – 3.7 RC – to the latest version 3.12 RTM. The total number of workstations to be upgraded is 44. Labels with RFID tags are encoded at the Final station.

July 2015
PROCSEMEA-Czech Republic-Mlada
Mlada-Epsilon2 Migrate to 3.12
Plant line Epsilon2 will upgrade its current gIMM-PROCS version installed – 2.5 RC – to the latest version 3.12 RTM. The total number of workstations to be upgraded is 12.

July 2015
PROCSASIA PACIFIC-China-Chengdu
New plant: Chengdu FECT – gIMM-PROCS
The plant will implement gIMM-PROCS system for Chengdu FECT project. PROCS system will control 9 new workstations. The plant will use the traceability system to make conformity checks and store process parameters during the production process of exhaust pipes.

July 2015
PROCSEMEA-Russia-Luga
Luga -V363R gIMM-PROCS Implementation
The plant will configure a new production line for project V636R. It will include 5 new workstations: Defroster Channel Injection, Top cover injection, Backup injection, VIB Welding, Final Control.

July 2015
PROCSEMEA-France-Messei
Messei X12C – gIMM-PROCS
The plant will deploy gIMM-PROCS system for X12C project. PROCS system will control the following 5 new workstations for X12C: Welding, Leaktest, Engraving, Control and Packaging.
These workstations are used to produce and pack exhaust pipes. The plant will use the traceability system to make conformity checks, store process parameters, and print the corresponding production labels.

July 2015
LINCSEMEA-Slovakia-Lozorno
New plant: Lozorno LINCS
The plant will implement one LINCS JIT/JIS system that will sequence to Volkswagen Slovakia Plant. The system will implement the standar functionalities: message processing, container management, sequence and container labels printing and warning system.

July 2015
PROCSEMEA-Czech Republic-Mlada
Mlada AU37X Migration to 3.12
The plant Mlada AU37X will upgrade its current gIMM-PROCS version installed – 3.4 RC – to the latest version 3.12 RTM. The total number of workstations to be upgraded is 23.

July 2015
PROCSEMEA-Spain-Pamplona
Orcoyen JMK03 gIMM-PROCS
The plant will implement gIMM-PROCS in the new project JMK03. The new production line will have 6 workstations: Measurement Q-Sigma, Wrapping, Insertion and Shriking, GBD Q-Sigma, Marking.

May 2015
PROCSEMEA-South Africa-Port Elizabeth
New Plant: Port Elizabeth – Panther Project – gIMM-PROCS
The plant will implement gIMM-PROCS in its new project Panther F398. The plant will have 3 lines with a total number of 16 workstations. These workstations are used to produce and pack exhaust pipes. The plant will use the traceability system to make conformity checks, store process parameters, and print the corresponding production labels.

May 2015
gIMMNew Crystal Reports printing engine for rvsJIT 5.9.2 CU044

  • New print mode that works with new CR shield hosted in IIS as WCF service.
  • For compatibility with previous version, a configuration field allow you choose to print mode between PrinterShield or CRNetShield.

April 2015
PROCSAMERICA-Brazil-Limeira
Limeira VOLVO FH gIMM PROCS
The plant will implement gIMM-PROCS system for its VOLVO FH project that includes 9 workstations.

April 2015
gIMMNew tool for error alerting via SMS.
SMS Gateway is a mail server that depending on the destination’s domain redirects the incoming mail to a SMS server o forwards it to the definitive mail server. The incoming mail can have different destinations, so the mail can be redirected both to the SMS server and the mail server, depending on the facilities of SMS server the mail can be sent to a group of users at once.

March 2015
LINCSEMEA-Spain-Arevalo Madrid
New plant: L3PS Inergy Arevalo.
The plant will implement LINCS JIT/JIS system that will sequence to one Renault Plant. The system will provide the standard functionalities: message processing, container management, ECS system for container and truck validations, Container and Truck labels printing and warning system.

March 2015
LINCSEMEA-France-Compiegne
New plant: L3PS Compiegne
The plant will implement one LINCS JIT/JIS system that will sequence to one Renault Plant. The system will provide the standard functionalities: message processing, container management, ECS system for container and truck validations, Container and Truck labels printing and warning system.

March 2015
PROCSAMERICA-Brazil-Limeira
Limeira Update to gIMM 3.12 version
The plant will upgrade current installed version is 3.4 RTM to version 3.12 RTM. The number of workstations to be upgraded is 10. This will allow the plant to have new available functionalities in reporting, production processes,etc…

January 2015
PROCSASIA-China-Shenyang
Shenyang-Conveyor system
The plant will modify its gIMM-PROCS conveyor system as a consecuence of a change in the delivery process, such a change will affect to container management. Changes will also affect container labels in order to adapt them to new fitment points. Cargo management will be updated to create conveyor truck for new containers.
New SCS will be configured in gIMM to validate new conveyor trucks.

January 2015
gIMMPDE3 Monitoring Screen
gIMM system is implementing a new screen for seeing at a glance the functioning of all PDE3 workstations of the system.
The main benefit is to have in one screen the status of all workstations, showing general system failure, PLC disconnected, Bit of Life lost, Time out responding to PLC, Inactivity alarm. The system will allow to navigate further in the detail of each group and workstation.

January 2015
PROCSASIA-China-Shanghai
New plant: Shanghai ASDS – gIMM-PROCS
The plant will implement gIMM-PROCS system in its new project for Shanghai ASDS. The line will have 2 workstations which will be used to produce exhaust pipes, making conformity checks and storing process parameters.

November 2014
gIMMgIMM 3.12 SP2 released

  • Tool for installing and managing the license.
  • Tool to automate installation of software cumulative updates.
  • Configurable translator using user configurable Visual Basic or C# code. This service pack also includes a Visual Studio project for helping the development of new translators.

November 2014
LINCSEMEA-Poland-Poznan
New plant: Poznan-Implementation LINCS in PO-poznan
The plant will implement gIMM-LINCS JIT/JIS system to supply for assembly line 1 for the Caddy model version 3 and 4 at Volkswagen nearby plant. The system will provide the standard functionalities: message processing, container management, ECS system for container, Container labels printing and warning system.

October 2014
PROCSUC883_886_890_891_Blowing Modifications
Gimm PROCS will be changed in order to improve the fuctionalities for Blowing workstations.
– show version info of PLC.
– Add a new security time interval between to valid weight measures in order to ignore all signals received during this period
– Add new Barcode for printint a new TSN without PLC / Weightscale.

October 2014
PROCSEMEA-Russia-Luga
Luga B299 gIMM-PROCS implementation
The plant will implement gimm-PROCS on its new line B299. The line will have 11 workstations.

October 2014
PROCSEMEA-France-Bains-sur-Oust
BSO – Upgrade PROCS to 3.12
The plant is producing the Instrumental Panels for 2 models of PSA Group, named with the project codes W2 and X7. The production lines have a total amount of 11 workstations (some of them shared between W2 and X7 lines). This plant is working with PROCS since 2008 and at the end of 2015 the version is upgraded to PROCS 3.12.

September 2014
gIMMUC893 – New functionalities for PDE3 Native
gIMM 3.12 or higher is implementing new functionalities for PDE3 Native in order to allow new functions for workstations, add the possibility to use production multi-routes, and stop/start several workstations on FECT and similar projects.

August 2014
PROCSEMEA-Spain-Barcelona
Abrera-New PickToLight System
The plant will implement a change in current LINCS system to manage a new work area that controls 75 new shelve-locations using pick-to-light. The system will add a new container to be managed by the system and a new Expedition Control System (ECS) to validate this container. The pick-to-light system existing in the plant will be synchronized with ECS in order to switch on and off the lights as white-collar operator advance in the work.

August 2014
PROCSDSV NEW VW Supplier

July 2014
LINCSEMEA-France-Saint Desirat
New plant: Saint Desirat – P2683 – Flux CKD.
The plant will add add a CKD flow to current LINCS configuration to manage new DELJIT file with production assigned to new set of containers for each family and new trucks. Also new Expedition Control System (ECS) for containers and truck will be implemented.

July 2014
PROCSEMEA-South Africa-Port Elizabeth
Port Elizabeth Cummins CVE Volvo – gIMM-PROCS
The plant will implement a traceability system for controlling the production of each part of the project PORT ELIZABETH CUMMINS CVE VOLVO. PROCS system will control 11 new workstations, which are used to control the production process of exhaust pipes. Once the parts are produced, they are packed into containers.

June 2014
PROCSEMEA-Czech Republic-Bakov
New Plant: Bakov – VW MQB A1 – gIMM PROCS
The plant will implement PROCS traceability system for controlling the production of each part of the project Bakov VW MQB A1. The project will have 2 workstations.

June 2014
PROCSEMEA-Spain-Pamplona
New Plant: Orkoien – gIMM-PROCS D610-D620
The plant will implement a traceability system for controlling the production of each part of the project ORKOIEN D610-D620. gIMM-PROCS system will control 4 new workstations.
These workstations are used to produce and pack exhaust pipes in the same operation. It means that the plant uses packing workstations to pack the produced parts doing a conformity check of the components used to build the part in the same operation.

May 2014
PROCSEMEA-Russia-Togliatti
Togliatti-New shipping Flow
The plant will add a productive station for producing kits and change the SCS for loading kits. In consequence, gIMM system will be changed to validate the components of a kit (the modules) on a first step and later on load the kit on the corresponding container by checking only the kit label. The idea is to allow loading into the container whichever kit of the expected part number, not necessarily the launched for the order itself.

May 2014
PROCSEMEA-Spain-Valencia
Almussafes – CD391E (Sequence and traceability) – New Ford Mondeo (Door Panels)
The plant is producing the Door Panels for the new Mondeo model of Ford car manufacturer (identified with the code CD391E). The door panels production is done in JIT (Just-In-Time) mode and managed by LINCS (RvsJIT). Once the reception of call offs is done in LINCS, it communicates to PROCS the production order and triggers the printing of the production labels that will be used by the operators to complete them through its 13 workstations.
The plant of Faurecia Almussafes is working with PROCS since 2006 (being one of the first plants with PROCS) and due to its increasingly growth, it has nowadays 3 PROCS systems, supporting more than 100 workstations on the Interior Systems and Emission Control Technologies divisions.

April 2014
PROCSEMEA-Netherlands-Roermond
Roermond-F313B CMI€6 gIMM-PROCS
The plant will implement gIMM-PROCS traceability system for controlling the production of each part of the project ROERMOND F313B CMI, F385B SCANIA and F304 DAF. PROCS system will control 60 workstations.

April 2014
PROCSEMEA-Netherlands-Roermond
Roermond-F304 DAF€6 gIMM-PROCS
The plant will implement gIMM PROCS traceability system for controlling the production of each part of the project ROERMOND F304 DAF €6. PROCS system will control 17 workstations.
The plant will use the traceability system to make conformity checks and store process parameters during the production process of exhaust pipes, and also to print production labels in some of the stations.

April 2014
PROCSASIA PACIFIC-India-Chennai
Chennai – B515 IP LHD
The plant is producing the Instrumental Panels for a vehicle of Ford car manufacturer with PROCS since 2012. Initially, these vehicles where foreseen to be sold only in Asia, but in 2014 it was decided to open the markets and to produce cars also for the European market. For that reason, the production line needed to be adapted to these new requirements (change operational procedures and addition of workstations), since the European market requires higher levels of quality and security.

April 2014
gIMMUC845 – PDE3 improvements
gIMM version gIMM 3.12.0.8128 will add new functionalities and improvements for Native PDE3:

  • Random order for components
  • Read components one by one
  • Current Container Status
  • Unpack mandatory for reprocessing on Packing station
  • Packing degraded mode labels
  • Reprint from reports
  • Container position on item report
  • Change variables position and show offset on configuration screen
  • Copy-Paste for variables configuration
  • Formatting function on tag and super tag edition screen
  • Print format by part type configuration
  • All WS by device in PDE3 viewer report

March 2014
PROCSEMEA-Russia-Luga
Luga-B515IP gIMM-PROCS implementation
The plant will implement a new line B515IP on the existing gIMM-PROCS installation. The system will control 10 more workstations.

February 2014
PROCSEMEA-England-Fradley
Fradley – L494 IS DP Block 96
The plant is one of the top suppliers of Jaguar-Land Rover car manufacturer. Since 2008 it is working with PROCS for the production of the Instrumental Panels of a Land Rover vehicle. During 2011 started producing the door panels for Land Rover Range Rover (L405) in JIT (Just-In-Time) mode, all controlled with a complete gIMM system (sequencing and production). At the beginning of 2014, Land Rover launched to market the Sport version of the Range Rover (L494) and opened a new facility in the Solihull factory to produce it (named Block 96). This required to install a second complete gIMM system in the plant of Faurecia Fradley for producing the door panels of this new vehicle in an assembly lines of 22 workstations.

January 2014
PROCSEMEA-Slovakia-Kosice
Kosice – AC217DP gIMM-PROCS
The plant will change the existing production line AC217DP line adding 18 workstations. The existing gIMM-PROCS traceability system will be reconfigured to control the new workstations.

January 2014
LINCSEMEA-Spain-Barcelona
Auto VW Martorell- optimizationT12
The plant will migrate its current LINCS system to a virtualized environment. LINCS version will be upgraded to the latest one.
As a part of the continual improvement process of the car manufacturer, two LINCS systems will be consolidated into one gIMM – LINCS system in a virtualized environment. A paper printing reduction will be achieved by analyzing all the sequenced families (50+) to the assembly line and switching from a unitary part labeling to lists of parts to be used by operators.

November 2013
LINCSEMEA-Czesch Republic-Mlada
Mlada Boleslav -W176 Duplicate line
The plant will duplicate the production line to cope with growing production demand. gIMM-PROCS will be configured to control 16 more workstations. The deployment in various phases assures a low risk rollout of the new workstations.

November 2013
LINCSEMEA-France-Guichen
New plant: Guichen LINCS PSA
The plant will implement one LINCS JIT/JIS system in order to supply rear bumpers assembly line1 and models X7/W2 to PSA Rennes. The system will provide the standard functionalities: message processing, container management, ECS system for container, Container labels printing and warning system.

October 2013
PROCSASIA PACIFIC-China-Wuhan
China (Wuhan) A94 T91-93 IP gIMM-PROCS
The plant will update its production lines A94 / T91-T93, increasing in 11 workstations. gIMM-PROCS will be reconfigured to control the new workstations.

September 2013
PROCSEMEA-Spain-Vitoria
Lacor Industrial Quality – Vitoria – Secuenciación MBE
The plant will implement a gIMM-LINCS JIT system in order to deliver parts to Mercedes – Daimler (MBE) in Vitoria and a gIMM-STOCS system to manage the plant stock warehouse. The LINCS system will provide the standard functionalities: message processing, container management, ECS system for container, Container labels printing and warning system.
STOCS system will send the OEM the stocktaking, maintain customer, providers, references and packaging catalogs, receive goods and allow to print the warehouse label and control warehouse status and allow its regularization.

September 2013
PROCSEMEA-Slovakia-Kosice
Kosice – AC217IP gIMM PROCS
The plant will update its production line AC217IP line , increasing in 25 workstations. gIMM-PROCS will be reconfigured to control the new workstations.

August 2013
PROCSEMEA-France-Bavans
New plant: Bavans – gIMM PROCS
Bavans (France). The plant will have a traceability system for controlling the production of each part of the project BAVANS. PROCS System will control 4 new workstations.

July 2013
PROCSEMEA-France-Beaulieu
Beaulieu – Upgrade to gIMM version 3.12
Beaulieu (France) The plant will upgrade its current installed version 3.5.2. to the latest one, 3.12. The number of workstations to be upgraded is 27.

July 2013
LINCSEMEA-France-Vernon
LINCS Vernon Renault Sandouville L3PS
Vernon (France). The plant will implement one LINCS JIT/JIS system that will sequence to assembly line1 and models X82 of Renault Sandouville. The LINCS system will provide the standard functionalities: message processing, container management, ECS system for container and truck validations, Container and truck labels printing and warning system.

May 2013
LINKSEMEA-Spain-Vitoria
Vitoria-VS20-Adaptation LINCS
Vitoria (Spain). The plant will adapt its current LINCS JIT/JIS system to include the sequencing for new VS20 model for Mercedes Vitoria (MBE). The sequence process for durrent model NCV2 will remain the same until its end of production. Apart from the standard functionalities, the system will allow to print Picklist for the new model, sequence label KIT BOX for both models, and will add new information about the container in the sequence label.

April 2013
PROCSEMEA-Netherlands-Roermond
New plant: Roermond F385B – gIMMPROCS
Roermond (Netherlands). The plant will implemente a gIMM-PROCS traceability system for controlling the production of each part of the project ROERMOND F385B. The PROCS system will control 9 new workstations.

April 2013
Barcelona. New gIMM version 3.12 just released. Some of the improvements and new functionality added include:
Open Rack Automatically. With these changes, it won’t be necessary to scan the “Open Container” label. The System will automatically open the container when the TSN is read according to the version.
The container is opened automatically without the need to scan the “Open Container” label.
Two TPC’s on the same WorkStation. Workstations can have 2 TPC Displays. Both TPCs show the same message and have the same IP address. With this change, a secondary TPC screen can be configured on each workstation defined on the system. The secondary screen will show exactly same contents as the main screen.
This change affects the Production Manager Workstations screen. The system will include a secondary TPC configuration screen.
Native PDE3 Implementation. Implementing PDE3 protocol and workstation workflow in the ProductionManager service in order to increase processing speed and quantity of managed stations on FECT and similar projects.
The current solution in gIMM for controlling FECT plants using PDE3 protocol is based on a communication engine, managed by the HalManager service with the MCUModBus, and a process engine implemented with a configuration of rvsJIT called PROCS.
PROCS was created before than PDE3, thus the 100% of the specifications are not covered. The normal workflow of the production process is enough, but more detail on the error responses are requested by Customers.
We already did a different implementation in gIMM, for managing workstations using ProductionManager
service for controlling the process, with very high improvements in performance and response time.
ProductionManager instantiates one process by workstation in memory, then maintains the machine state in memory, accessing the database only when it is really needed, to obtain or insert traceability data and load initial configuration.
ProductionManager, as well as the HalManager, are both able to work with multi-threading, thus they can also process all workstations in parallel.
This proposal consists on implementing a similar architecture to manage workstations using the PDE3 protocol, creating a module in ProductionManager service to control the process of the workstation and a new MCU (modular communication unit) on the HalManager service, to manage the PDE3 communication in an optimum way.
The communication between both services is performed using .Net remoting technology that, allows multi-threading and high performance. This allows all workstations to run fully in parallel, avoiding bottlenecks.
The final improvement will be in the configuration side, with the creation of a new and specific screen to setup the workstations, without any need to use different and complex screens for the hardware and the workstation itself.
Export Tool. Phase 1. Export a selected part of gIMM configuration to a T-SQL script file, in order to import it in another gIMM Server. Currently gIMM solution offers an on-line configurable system functionally.
This visual Export Tool generates Database Scripts of a specified configuration. User can select the business objects to export, this business objects are linked by a logical relation.
Import Tool. Phase 2. The importing data operation will be available on the same windows application as the exportation. The application will have a file selector for the user to select the exported file to import and a control error list in case of errors on the importing process.
When the user selects the file, the system will compare the stored version on the file with the system database version, if it doesn’t match, an error will be shown. The page will also show the information in the file, to be imported.
Once the file to import is selected, the import button will be enabled, allowing to start the process by pressing it. All importing process will run inside a SQL transaction, in order to rollback the entire process in case any errors are detected. Should any error happen, these will be shown on the grid. In both cases, ok or error, the system will store a system log, with the windows user name, machine name and file content detail.
In order to solve the gIMM database versioning problem, the system will analyze the gIMM log tables structure, prior to storing the log and dynamically create the query to execute.
We will prepare the application to solve versioning problems, from version 3.5 to the current gIMM release, but we cannot ensure that it will work for future versions. In case of detecting incompatibilities on the system log tables, the application will skip this step and show a warning message to the user, but the importing process will be performed.
Depending of the file content detail, the application will show the user a list of manual post-importing steps, needed for the system to load the new configuration (restart some service, start some device from device management screen, etc.).
gIMM Compatibility 64-bit Environments. gIMM has been adapted to assure a proper functioning in 64-bits environments. The 64-bits products and operating systems supported are the following:
S.O: Windows Server 2003 R2 64bit versions and Windows Server 2008 R2.
Database: Microsoft SQL Server 2005, 2008, 2008 R2 and 2012.

March 2013
Barcelona. New gIMM projects just arrived. Sequencing projects in Vernon and Saint-Désirat and additional ones from traceability and production control projects in Tanger, Roermond, Arevalo and Villaverde.
Global automotive suppliers continue to reinforce their confidence in gIMM as a leader product for managing automotive supply chains.

January 2013
Barcelona – gIMM closes 2012 with a record increment sales when comparing with 2011.
Despite the global recession, the Automotive sector has proven to be a safe haven for IT investments. Especially Asia has shown the highest increment rates, with some succesful implementations in Thailand and South Korea.